Operation and error codesEndurance battery – lights and error messages
Van Beijck & Sitgo
Endurance Efficiënt 10 / 12 / 15 Ah
Endurance Pro 12 / 16 / 20 Ah
Endurance Efficiënt 10 / 12 / 15 Ah
Endurance Pro 12 / 16 / 20 Ah
This guide applies to the Endurance battery with battery passport. You can recognise this battery by the QR code on the battery. The battery has 4 lights. Light 1 is the light on the left. The lights show how full the battery is and whether something is wrong.
The lights blink here just like on the battery.
Download as PDF ↓How to read the lights
on
blinks slowly
blinks fast
blinks very slowly
alternates red / yellow
off
1. How full is the battery? (while riding)
| Lights | Meaning |
|---|---|
| 81 – 100 % full | |
| 61 – 80 % full | |
| 41 – 60 % full | |
| 21 – 40 % full | |
| 1 – 20 % full Charge the battery soon. | |
| Empty (0 %) Charge the battery as soon as possible. | |
| All lights off The battery is off or in sleep mode. |
2. While charging
| Lights | Meaning |
|---|---|
| 0 – 20 % full | |
| 21 – 40 % full | |
| 41 – 60 % full | |
| 61 – 80 % full | |
| 81 – 99 % full | |
| Full (100 %) You can disconnect the charger. |
3. The battery protects itself
With these messages the battery switches itself off temporarily to prevent damage. The battery is usually not broken.
| Lights | What is wrong? |
|---|---|
| Too much current requested Switch the bike off and on again. Does it happen often? Contact your dealer. OCP | |
| Short circuit Do not use the bike and contact your dealer. SCP | |
| Voltage too high Disconnect the charger. Only use the original charger. OVP | |
| Voltage too low – battery is completely empty Charge the battery with the original charger. UVP | |
| Charging current too high Disconnect the charger. Only use the original charger. COCP | |
| Battery too hot Let the battery cool down in a cool place, out of the sun. OTP | |
| Battery too cold Let the battery reach room temperature indoors. Only then charge it. UTP | |
| Difference between the cells Charge the battery completely. Does the message remain? Contact your dealer. DELTA_V | |
| Temperature difference in the battery Let the battery rest for one hour at room temperature. Does the message remain? Contact your dealer. DELTA_T | |
| Start-up failed Switch the bike off and on again. Does the message remain? Contact your dealer. PRECHG_FAIL | |
| Fuse in the battery blown Do not use the battery any more. Contact your dealer. FUSE_BURNT |
4. Fault in the battery
These messages mean there is a fault in the battery electronics. Never open the battery yourself. Contact your dealer and mention the message.
| Lights | Fault |
|---|---|
| Protection circuit does not startBQ76_INIT | |
| No connection with the protection circuitBQ76_COMM | |
| Setting the protection circuit failedBQ76_CONFIG | |
| Error in the protection circuitXREADY / OVRDALERT | |
| Hardware errorHW_INCORRECT | |
| Memory errorWRITE_FLASH | |
| Unknown faultHW_UNKNOWN |
Tip for the dealer: scan the QR code on the battery. You will then see the battery passport with the serial number and the history of this battery. Always mention the serial number with a message.